Then gently rub them with a dry rag or a paper towel to remove any visible dirt and grime. These conditions can limit the performance of a skate bearing.

How To Clean Your Roller Skate Bearings Skate Bearings Roller Derby Roller

Clean out the bearing.

How to clean bearings. In every bearing cleaning method you need to melt these substances first to continue the cleaning process. They are organic in nature and very quick in cleaning ball bearings. Well you will need good quality solvents to begin with.

So what to clean bearings with. If your bearings are still coated in nasty repeat the process. If the amount of dirt is normal take a paper in hand and clean the bearings with papers.

This takes some time and can get quite messy so make sure you use latex rubber gloves to protect your hands from exposure to chemicals. Cap the container and shake for 5 minutes. If your bearing is plastic and not metal only use 100 isopropyl alcohol.

This is the primary reason you dismembered your skateboard. Next slide the stacked bearings into the bottle and screw on the lid. Then stack the bearings onto the bolt of a cleaning kit and fill the bottle with citrus cleaner isopropyl alcohol or acetone.

This will dry out the bearings but they will be clean from dirt and grease. Dry off and re-lubricate. To clean ball bearings start by removing the casing from the wheels and prying off the seal with a paperclip to expose the bearings.

Now is a good time to clean your bearings. After youve let your skateboard bearings soak in the cup of isopropyl alcohol for at least 30 mins take each bearing out individually and use a paper towel to wipe them clean and dry. You can also use a spray-on degreaser to blast out all the crap from your bearings.

The next thing is to remove the worn out crap and grease from your bearing race. The citrus cleaner referred to in the video works great. The main dirt and grime have to be cleaned manually at the beginning of cleaning the bearing.

Tap out dirt and excess liquid then dry off your bearings with a paper towel or rag. Soak the bearings in a solvent cleaner or spray with dry grease. If this method is not working then follow another method.

Well give you step-. Dry your bearings with a hairdryer. For this step you will need cleaner in a spray bottle.

And the best solvents for cleaning bearings are acetone and isopropyl alcohol. Cleaning your bearing is essential for fast long-lasting bearings. Then wipe it off and repeat.

Soak the bearing in alcohol or water and soap. Cleaning the bearings will decrease normal wear-and-tear and increase the performance and prevent the. Spray it directly on to the bearing and soak it in there for a few seconds.

Apply a skateboard bearings lubricant and evenly distribute. Pour some isopropyl alcohol 90-100 alcohol into a bowl or mix together a solution of water and dish soap in a bowl. To clean skateboard bearings start by removing the wheels from your skateboard and using a screwdriver to pry the bearings from the wheels.

How To Clean Skateboard Bearings. Set a hairdryer on high and place it over the bearings until all of the moisture has been dissolved. Itll save you money in the long run and is kind of fun to do anyway.

Clean bearings allow for an easy effortless roll for a skater of any type or level. Then drop your bearing in the bowl and allow it to soak for 30 seconds. Put the bearings in a container WITH A LID and fill it to the brim with isopropyl alcohol.

Avoid contact with your skin and ensure the room is well ventilated. Here is a short video that shows you how to clean skateboard bearing. The best way to clean wheel bearings and the spindle of the axle is to remove all old grease with shop rags or disposable paper towels.

Methylated spirit is the best bet for this or just soak the bearings in alcohol or some solvent. Remove the bearings from the solvent and place them on a dry paper towel or rag. Take a plate and clean it as well.

Professional skaters recommend avoiding skating in the sand water dirt or humid conditions. Set the bearings out to dry. You can also use a citrus based cleaner with an orange oil or lemon juice to clean your bearings.